Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the front hood of the Toyota C HR

Model: Toyota C Hr Ax50, MK 1, Ax10 - Years 2016-2023

To open the front hood of the Toyota C HR, we need to get into the car and lift the lever with the hood symbol located under the steering wheel. After lifting the lever, we will notice that the hood will raise a few centimeters. So let's position ourselves in front of the front hood, insert our hand into the gap and move the small internal lever from right to left, then lift the hood. Throughout the maintenance, we can keep the hood open by placing it on the locking bracket. To close the hood, we will need to remove the locking bracket and let it fall down on itself.

Posted on 8 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb in a Toyota C-HR?
How to Replace the Headlight Bulb in a Toyota C-HR?
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) To replace the headlight bulb in a Toyota C-HR, open the bonnet to access the rear of the corresponding headlight. Here, disconnect the connector att…
How to Open the Bonnet on the Toyota C-HR?
How to Open the Bonnet on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) In this tutorial, you will see how to open the bonnet on the Toyota C-HR, a very simple operation that follows the standard procedure of most vehicle…
Where is the cabin fuse box located in the Toyota C-HR?
Where is the cabin fuse box located in the Toyota C-HR?
Toyota C Hr (2023-2026 / MK 2) In the following guide, we will explain the steps you need to take to easily locate the fuse box located inside the cabin of your latest Toyota C-HR.…

Other guides you may be interested in

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos