Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the Telepass holder from the car windshield

Model: (Various brands) Various

The Telepass holder is usually attached to the car windshield in order to ensure that the Telepass works immediately when passing through toll gates. However, if you decide to remove the holder, you must follow the following procedure: -Insert the Telepass into the holder; -Pull the holder inward to detach it from the windshield, you can use a glass scraper or a rigid plastic card to help you; After removing the holder, it is essential to remove the glue from the windshield. To remove the glue from the windshield, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Posted on 6 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to position the Telepass holder on a vehicle
How to position the Telepass holder on a vehicle
(Various brands) Various The installation of the telepass holder is a simple and quick operation to be carried out independently. First of all, the ideal position behind the …
How to remove the telepass holder from the windshield
How to remove the telepass holder from the windshield
(Various brands) Various Today we will explain how to remove the telepass holder from a vehicle's windshield. Removing the telepass holder from the windshield is a very simpl…
How to Install the Telepass?
How to Install the Telepass?
(Various brands) Various To install the Telepass on your car, remove the double-sided adhesive film located on the back of the device support. Once this film is removed, pres…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos