Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on the Hyundai i20

Model: Hyundai I20 GB, IB, MK 2 - Years 2014-2021
Part: Tire pressure warning light

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Hyundai i20?
How to Reset the Tyre Pressure Warning Light on a Hyundai i20?
Hyundai I20 (2020-2026 / BC3, MK 3) If the tyre pressure warning light appears on the instrument panel of the Hyundai i20, it means that at least one of the four tyres is at an insuffic…
How to Reset the Tyre Pressure Light on the Hyundai i20?
How to Reset the Tyre Pressure Light on the Hyundai i20?
Hyundai I20 (2020-2026 / BC3, MK 3) If the low tyre pressure light is displayed on the Hyundai i20 dashboard, it means that at least one of the four tyres is at insufficient inflation p…
How to Reset the Tyre Pressure Light on a Hyundai i20?
How to Reset the Tyre Pressure Light on a Hyundai i20?
Hyundai I20 (2020-2026 / BC3, MK 3) To reset the tyre pressure light on the Hyundai i20, first inflate the tyres to the pressure values indicated on the sticker attached to the driver's…

Other guides you may be interested in

How to Adjust the Headlights on a Dacia Sandero

To adjust the headlights on a Dacia Sandero, turn on the instrument panel by rotating the appropriate key in the ignition switch. Once the panel is on, use the knob located to the left of the steering column, at the bottom of the dashboard. Turning this knob counterclockwise will lower the beam of the headlights; conversely, turning it clockwise will raise the beam. Once the correct angle is found, you can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos