Do it yourself
| ||||
|
Mini - Video tutorial
Model: Mini Mini
R56, R55, R57
- Years 2007-2014 Programming the new key for the Mini Cooper R56 model is a very simple operation. The first thing to do is to get into the car and sit on the driver's seat. Then you will need to insert the new key into the ignition switch and start the car. After a few seconds, you will need to turn off the car and remove the key from the ignition switch. Wait a few seconds and repeat this process three more times before hitting the road. By doing this, your new key will be perfectly programmed for starting and turning off the car.
Posted on 26 July 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsReplace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.051
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |