Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS on a Hyundai i20

Model: Hyundai I20 GB, IB, MK 2 - Years 2014-2021
Part: Tire pressure warning light

To reset the low tyre pressure sensor, follow these steps: sit in the driver's seat and turn on the ignition. Locate the button on the steering wheel, on the right side, just above the "cruise" control. Press the button multiple times until the display shows the tyre pressure status. At this point, exit the vehicle and restore the correct pressure in the tyre with low pressure. Then, re-enter the cabin and the low tyre pressure warning light will be turned off.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on a Hyundai I20
How to reset the TPMS light on a Hyundai I20
Hyundai I20 (2014-2021 / GB, IB, MK 2) The TPMS light of the 2018 Hyundai I20 must be reset after the tire pressure has been adjusted. To reset the TPMS light, we must: - start the car; - …
How to reset the TPMS light on the Hyundai I20
How to reset the TPMS light on the Hyundai I20
Hyundai I20 (2008-2014 / MK 1, PB) Today we will explain how to reset the TPMS light on the Hyundai I20. To reset the light, we need to turn on the instrument panel and press the menu …
How to Reset the Tyre Pressure Light on the Hyundai i20
How to Reset the Tyre Pressure Light on the Hyundai i20
Hyundai I20 (2014-2021 / GB, IB, MK 2) These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset,…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos