Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tire pressure warning light

Video tutorial

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option.

At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on a Jeep Renegade
How to Reset the Tyre Pressure Warning Light on a Jeep Renegade
Jeep Renegade (2014-2021 / ) The tyre pressure monitoring system of a Jeep Renegade monitors tyre pressure. If the TPMS warning light appears on the vehicle display, it means you…
How to reset the TPMS light on the Jeep Renegade
How to reset the TPMS light on the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) The tire pressure warning light, also known as the TPMS light, monitors the pressure of the tires on the road; in case the light activates on the car…
Resetting the Tyre Pressure of a Jeep Renegade
Resetting the Tyre Pressure of a Jeep Renegade
Jeep Renegade (2014-2021 / ) The video shows how to reset the tyre pressure warning light of a Jeep Renegade. It is a fairly simple operation that can be done independently in ju…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos