Do it yourself
| ||||
|
Jeep Renegade - Video tutorial
Model: Jeep Renegade
- Years 2014-2021 The tire pressure monitoring system of a Jeep Renegade monitors the tire pressure, if the TPMS warning light appears on the car's display it means that a tire pressure check must be performed. On the edge of the door on the driver's side you will find information regarding the pressure recommended by the manufacturer. Then inflate the tires. You will now need to drive above 24 km / h for the system to reset. However, the warning light may remain on if these have not been inflated correctly.
Posted on 12 June 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |