Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the clock on a Renault Master 3

Model: Renault Master MK 3 - Years 2010-2023
Part: Clock

In this guide, we will see how to set a new time on a Renault Master 3. Let's start the modification by turning on the vehicle's instrument panel without starting the engine. Then, using the right lever arrows on the steering wheel, scroll through the options on the information display until you reach the "set time" option. Press the bottom arrow button to make the displayed time flash. After that, press and hold the bottom arrow button to switch to modifying the number of hours, which can be adjusted using the two arrow buttons on the lever. Once the correct number of hours is set, press and hold the bottom arrow button again to switch to setting the minutes. After setting the correct time, restart the vehicle.

Posted on 9 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on the Dashboard of the Renault Master
How to Set the Clock on the Dashboard of the Renault Master
Renault Master (2010-2023 / MK 3) These brief and simple steps will show you how to adjust the clock on the dashboard of the Renault Master, following the instructions below. First, g…
How do you set the clock on the Renault Master?
How do you set the clock on the Renault Master?
Renault Master (1997-2010 / MK 2) To ensure that the clock on the instrument panel of the Renault Master is adjusted, you need to turn on the panel by inserting the ignition key into …
How to set the clock on the Renault Master
How to set the clock on the Renault Master
Renault Master (1997-2010 / MK 2) In a few simple steps, we will see how to adjust the time on the central display of the Renault Master dashboard. First, get into the vehicle and tur…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos