Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you set the clock on the Renault Master?

Model: Renault Master MK 2 - Years 1997-2010
Part: Clock

To ensure that the clock on the instrument panel of the Renault Master is adjusted, you need to turn on the panel by inserting the ignition key into the corresponding slot: once the panel is turned on, you can locate the button below the clock. By holding down this button, you will notice that the hands will start to move: therefore, you will need to continue holding down the button until the adjustment is complete. Once the operation is completed, you can turn off the panel by turning the key in the opposite direction.

Posted on 7 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you set the clock on the Renault Master?
How do you set the clock on the Renault Master?
Renault Master (2010-2023 / MK 3) To adjust the clock shown on the central screen of the Renault Master, first turn on the instrument panel: once this is done, press and hold the SOUR…
How do you set the clock in the Renault Master?
How do you set the clock in the Renault Master?
Renault Master (2010-2023 / MK 3) When you need to set parameters, adjust certain sensors, reset warning lights and more, you can often do so easily through electronic diagnostic tool…
How to set the time on the Renault Master
How to set the time on the Renault Master
Renault Master (1997-2010 / MK 2) In a few simple steps, we will see how to adjust the time on the instrument panel of the Renault Master. First of all, we get on board the vehicle an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos