Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear seat of a Hyundai Tucson?

Model: Hyundai Tucson NX4, MK 4 - Years 2022-2026
Part: Seat

To remove the rear seat of a Hyundai Tucson, you need to follow a few steps. Start by moving the front seats to their most forward position to create maneuvering space. Next, locate the release lever located on the bottom side of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchoring pins. Once unlocked, tilt the seat upwards and towards the front to remove it from its position. You will need to repeat this process for both sides of the rear seat. Make sure to pay attention to any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly will be complete.

Posted on 21 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery on a Hyundai Tucson
How to Replace the Key Battery on a Hyundai Tucson
Hyundai Tucson (2015-2021 / TL, MK 3) Before you can start, you need to release and remove the physical key from the electronic key of your Hyundai Tucson by simply pressing the relevant …
Replacing the Key Remote Battery of the Hyundai Tucson
Replacing the Key Remote Battery of the Hyundai Tucson
Hyundai Tucson (2022-2026 / NX4, MK 4) Here’s how to remove and replace the battery of the key remote for the Hyundai Tucson. First, take your remote and start by removing the physical key…
How to Replace the Key Battery of the Hyundai Tucson
How to Replace the Key Battery of the Hyundai Tucson
Hyundai Tucson (2015-2021 / TL, MK 3) Replacing the battery inside your Hyundai Tucson key is fortunately one of the simplest DIY maintenance tasks. Follow the instructions in this guide,…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos