Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Third Brake Light on a Renault Master Mk2

Model: Renault Master MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part:

See other generations:
Video tutorial

To replace the third brake light on your Renault Master Mk2, carefully read the following guide and follow the described steps. First, ensure you have purchased a new bulb that is fully compatible, then go to the rear of the vehicle and open both doors.

Once done, remove the panel from the left door and unscrew the screws holding the third brake light with a battery-operated screwdriver. At this point, disconnect the electrical cable and proceed with the replacement of the third brake light.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

How to remove the rear bumper of the Renault Master
How to remove the rear bumper of the Renault Master
Renault Master (1997-2010 / MK 2) Today we will discover the instructions that will allow us to disassemble and replace the rear bumper of the Renault Master. First, we open the rear …
How to replace the rear headlight bulb of the Renault Master
How to replace the rear headlight bulb of the Renault Master
Renault Master (2010-2023 / MK 3) If you need to replace the rear headlight bulb of your Renault Master, but you don't know how to do it, then you just have to carefully read the foll…
How to Replace the Rear Light of the Renault Master
How to Replace the Rear Light of the Renault Master
Renault Master (1997-2010 / MK 2) This guide explains how to replace the rear light of the Renault Master mk2. To carry out this task, you will need a 30mm Torx key, an electrical con…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos