Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light of the Renault Master

Model: Renault Master MK 2 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Tail light

See other generations:
Video tutorial

This guide explains how to replace the rear light of the Renault Master mk2. To carry out this task, you will need a 30mm Torx key, an electrical contact cleaner spray, and a new light unit. Open the rear door and use the Torx key to remove the screw.

Then, disconnect the light unit and unplug the connector. Clean the connector with the spray and allow it to dry. Take the previously removed light unit and remove the lens.

Insert the lens into the new light unit and proceed with the installation.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

How to replace the rear headlight bulb of the Renault Master
How to replace the rear headlight bulb of the Renault Master
Renault Master (2010-2023 / MK 3) If you need to replace the rear headlight bulb of your Renault Master, but you don't know how to do it, then you just have to carefully read the foll…
How to Replace the Rear Light Bulb in a Renault Master II
How to Replace the Rear Light Bulb in a Renault Master II
Renault Master (1997-2010 / MK 2) Replacing the rear light bulb in your Renault Master II is quite simple. To complete the operation, carefully read the following guide and follow the…
How to replace the front headlight bulb of the Renault Master
How to replace the front headlight bulb of the Renault Master
Renault Master (1997-2010 / MK 2) Today we will explain how to replace the headlight bulb and fog light bulb on a Renault Master model 2 vehicle. To replace the headlight bulb, we nee…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos