Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the AdBlue Warning Light on a Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years 2006-2024
Part: AdBlue warning light

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot Boxer (2006-2024 / MK 2) Good morning and welcome back to Scegliauto. Com! Today's goal is to reset the "AdBlue" warning light on our Peugeot Partner. Before performing the r…
Peugeot Boxer (2006-2024 / MK 2) Today's main steps will show us how to dismantle and replace the AdBlue tank of the Peugeot Boxer 2.0. First, it will be necessary to lift the vehicl…
Peugeot Boxer (2006-2024 / MK 2) If the AdBlue warning light has illuminated on the dashboard of your Peugeot Boxer van, it means that the emissions fluid has reached a too low level…

Other guides you may be interested in

    Frequently Asked Questions

    • Boxer 2006-2024 - AdBlue warning light on in the Peugeot Boxer, what to do? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos