Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove a Wheel and Fit the Spare on a Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Wheel

See other generations:
Video tutorial

To replace a wheel on a Peugeot Boxer, lift the vehicle with a jack: first, loosen the wheel bolts while the vehicle is still on the ground, as this makes the task easier. Then, remove the loosened bolts.

When removing the wheel, note that there are two protrusions on the wheel hub. These will help position the spare wheel in the correct slots. After doing this, replace the bolts.

After the first bolt, you can replace the wheel cover. Do not tighten them too much yet. Lower the vehicle.

Now you can properly tighten the bolts with the vehicle on the ground. The job is complete.


Updated on 10 July 2026 by ScegliAuto


Related tutorials

How to Remove the Spare Wheel in a 2007 Peugeot Boxer?
How to Remove the Spare Wheel in a 2007 Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) We are all used to finding the spare wheel in the boot of our car, beneath the cover. But where is it in vans? Unlike cars, the spare wheel is not im…
How to replace the front suspension of the Peugeot Boxer
How to replace the front suspension of the Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) In this guide, we will see the instructions that will allow us to disassemble and replace the front suspensions of the Peugeot Boxer, but also of the…
How to Replace the Rear Shock Absorbers on the Peugeot Boxer Van?
How to Replace the Rear Shock Absorbers on the Peugeot Boxer Van?
Peugeot Boxer (2006-2024 / MK 2) In this tutorial, you will see how to replace the rear shock absorbers on the Peugeot Boxer van, a very simple and quick operation. First, lift the r…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos