Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Third Brake Light on a Peugeot 508

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part:

Video tutorial

We will briefly review the instructions to remove and replace the lamp and bulbs of the third brake light on a Peugeot 508. First, open the boot lid and start by removing the plastic cover located inside, behind the third brake light; then disconnect the electrical connector and unscrew the screws of the light, removing it from the outside as shown in the video.

At this point, replace either just the bulbs of the stop light or the entire unit, securing it correctly onto the boot lid; finally, refit the internal plastic cover.


Posted on 19 April 2026 by ScegliAuto


Related tutorials

How to Set the Time on the Peugeot 508
How to Set the Time on the Peugeot 508
Peugeot 508 (2018-2026 / MK 2) Setting the time on the Peugeot 508, mk2 model, is a very simple operation that can be done independently. The first step is to turn on the instrumen…
What is the fuse diagram for the Peugeot 508?
What is the fuse diagram for the Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) If any devices in your Peugeot 508 have suddenly stopped working, the first thing to do is check the status of the respective fuses, which are indica…
How to Replace the Front Brake Pads on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Before starting, lift the front end of your Peugeot 508. Begin by removing the front wheel, unscrewing the bolts that secure the wheel to the hub. Ne…

How to reset the Service light of the Fiat 500X?

To reset the Service light of the Fiat 500X, insert the ignition key into the ignition switch to turn on the instrument cluster. Once powered on, press the accelerator pedal three times in quick succession. After this operation, wait a few seconds for the Service light reset to complete. Once the reset procedure is finished, release the pedals and then turn off the instrument cluster by turning the key.

Watch the video!


by ScegliAuto

More videos