Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Headlight Bulb on a Hyundai I30

Model: Hyundai I30 PD, MK 3 - Years 2016-2024
Part: Headlight bulb

This short video tutorial shows how to replace the dipped headlight bulb on a third-generation Hyundai I30, produced from 2016 to 2021. First, pull the release lever for the bonnet and open it. Next, unscrew the plastic cap at the back of the headlight as shown in the video, then disconnect the bulb connector. After that, unclip the metal tab holding the dipped headlight bulb in place, remove it, and replace it with a new one, following the procedure in reverse. Finally, repeat the same operation on the other headlight.

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Dipped Beam Bulb on a Hyundai i30
How to Replace the Dipped Beam Bulb on a Hyundai i30
Hyundai I30 (2007-2012 / FD, MK 1) This guide briefly explains how to remove and replace the dipped beam bulb of the front headlamp on a Hyundai i30. First, open the bonnet of your car…
How to replace the bulb of the right front light on a Hyundai I30
How to replace the bulb of the right front light on a Hyundai I30
Hyundai I30 (2011-2016 / MK 2, GD) In this video we see how to replace the headlight bulb on the right front side of a Hyundai I30: we open the hood and remove the plastic cap located …
How to replace the front headlight bulb of the Hyundai I30
How to replace the front headlight bulb of the Hyundai I30
Hyundai I30 (2016-2024 / PD, MK 3) Below we will discover the instructions that will allow us to disassemble and replace the headlight bulb of the Hyundai I30. First, open the hood of …

Other guides you may be interested in

How to Replace the Cabin Fan of a Citroen C3

Today, we will look at the instructions that will allow you to remove and replace the cabin fan of a Citroen C3 in simple steps. First, get inside the cabin and start by removing the lower part of the dashboard to access the cabin fan; then unscrew the fixing screws of the fan and disconnect its electrical connector to remove it, as shown in the video. At this point, install the new original cabin fan, checking its operation at various speeds, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos