Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulb on a Hyundai i30

Model: Hyundai I30 MK 1, FD - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Headlight bulb

See other generations:
Video tutorial

This guide briefly explains how to remove and replace the dipped beam bulb of the front headlamp on a Hyundai i30. First, open the bonnet of your car and begin by removing the plastic protective cap for the bulbs, which is located behind the headlamp; then disconnect the electrical connector and unclip the metal spring to remove the bulb, as shown in the video.

At this point, install the new dipped beam bulb of the correct type (in this case, a halogen H7); check its operation by making the electrical connection!


Updated on 15 July 2026 by ScegliAuto


Related tutorials

How to Replace the Dipped Headlight Bulb on a Hyundai I30
How to Replace the Dipped Headlight Bulb on a Hyundai I30
Hyundai I30 (2016-2024 / MK 3, PD) This short video tutorial shows how to replace the dipped headlight bulb on a third-generation Hyundai I30, produced from 2016 to 2021. First, pull t…
How to Replace the Front Headlight of the Hyundai I30
How to Replace the Front Headlight of the Hyundai I30
Hyundai I30 (2007-2012 / MK 1, FD) In this guide, we will see the instructions that will allow us to remove and replace the front headlight of the Hyundai I30. First, open the vehicle'…
Replacing the Rear Light Bulb on the Hyundai i30
Replacing the Rear Light Bulb on the Hyundai i30
Hyundai I30 (2016-2024 / MK 3, PD) If one of the rear light bulbs on the Hyundai i30 blows, it is important for our safety to change it as soon as possible. Open the boot and unscrew t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos