Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to lower the rear seats in the Peugeot 206?

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Seat

Video tutorial

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically.

Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How to Turn Off the Radio and Adjust the Volume on the Peugeot 206
How to Turn Off the Radio and Adjust the Volume on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today's guide will provide the necessary information regarding the operation of the radio in the Peugeot 206 and 206cc. First, get into the vehicle a…
How do you remove the rear seats of the Peugeot 206?
How do you remove the rear seats of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In order to remove the rear seats of the Peugeot 206, you need to loosen the screws that fix the bench to its housing: the screws will be located in …
How to Remove the Seats from a Peugeot 206?
How to Remove the Seats from a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) Removing the seats from a car, not just the Peugeot 206 but any vehicle, is a task that is far from difficult; it can be done easily on your own with…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos