Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seat of the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Seat

The instructions in this guide will show you how to remove and replace the front seat of the Peugeot 206. First, open the front door of the vehicle and start unscrewing all the fixing screws found on the front seat rails, moving the seat back and forth to access them; then disconnect the various wiring located underneath, as shown in the video. At this point, remove the seat from the cabin, making repairs or replacements as necessary; reassemble and securely fasten the front seat, finally adjusting its position.

Posted on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Seat from a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Is the seat in your Peugeot 206 damaged? Here’s how to remove it. Move the seat back (press the metal lever) and lift the seat cushion up, then unscr…
How to Replace the Front Wing on a Peugeot 206?
How to Replace the Front Wing on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the front wing on a Peugeot 206, first open the bonnet and loosen the screws that secure the upper front grille, allowing it to be complet…
How to Replace the Driver's Seat on the Peugeot 206 cc GTI Mk1
How to Replace the Driver's Seat on the Peugeot 206 cc GTI Mk1
Peugeot 206 (1998-2012 / MK 1) This guide shows how to replace the driver's seat on the Peugeot 206 cc GTI Mk1. Open the vehicle's sunroof and disconnect the battery to prevent any…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos