Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Lights and Third Brake Light Unit on a Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part:

These brief and simple steps will show you how to remove and replace the third brake light unit and its bulbs on a Peugeot 207. First, open the rear boot lid and start by removing the internal plastic cover; then push the third brake light unit outwards to unclip and remove it (disconnecting the electrical connector of the lights), as shown in the video. At this point, replace the bulbs or the entire third brake light unit, refitting it onto the rear boot lid; check the lights' operation!

Posted on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install LED Fog Lights on the Peugeot 207 cc
How to Install LED Fog Lights on the Peugeot 207 cc
Peugeot 207 (2006-2015 / MK 1) This guide shows how to replace the fog lights on the Peugeot 207 cc with LED units. First, open the bonnet. Once the vehicle is secure, use a trim r…
How to Remove the Third Brake Light of the Peugeot 207
How to Remove the Third Brake Light of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video tutorial, follow the main instructions to remove and replace the third brake light of the Peugeot 207, GTI version. First, open the bon…
How to Program the BSI Unit on a Peugeot 207
How to Program the BSI Unit on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To program the BSI unit on a Peugeot 207, you must first disassemble it so that it can be connected to the diagnostic tool's cables. Once the unit is…

How to Adjust the Handbrake on a BMW 1 Series?

To adjust the handbrake on a BMW 1 Series, use a tool to pry off the leather cover that wraps around the base of the handbrake lever. Once this cover is removed, you will be able to locate the spring that regulates the handbrake tension. At this point, adjust the nut located at the base of the spring: tightening the nut will make the handbrake firmer and reduce the lever's travel. Conversely, loosening the nut will decrease the handbrake's firmness and increase the lever's travel.

Watch the video!


by ScegliAuto

More videos