Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to remove the third stop of the Peugeot 207

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Tail light
Operation: How to remove the third stop of the Peugeot 207

In this video tutorial we will see the main instructions that will allow us to remove and replace the third brake light of the Peugeot 207, in the GTI version. First of all we open the bonnet and begin to unclip the plastic bulkhead that we find behind the light; then unhook it and push it to be able to extract it from the outside, disconnecting the electrical connector of the bulbs, as shown in the video. At this point we are going to replace, if necessary, the bulbs or directly replace the entire headlight; then we reassemble everything, applying the reverse procedure!


Posted on 14 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos