Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Bulb on a Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part:

In this article, learn how to replace the brake light bulb on a Peugeot 207. First, open the boot and locate the release pins. Press the pins to unlock the headlamp. Now, close the boot and pull it outward to remove it. Once removed, take out the bulb by turning it half a turn. After removing it, simply insert the new bulb and refit the headlamp into its housing, applying pressure to secure it and engage the fixing pins. At this point, the procedure is complete.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Light Bulb on a Peugeot 207?
How to Replace the Brake Light Bulb on a Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To replace the brake light bulb on a Peugeot 207, open the boot lid and detach the pins located at the top, near the light. Once the pins are detache…
How to replace the stop fuse of the Peugeot 207
How to replace the stop fuse of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this guide we will see how to replace the stop fuse of the Peugeot 207, in simple and quick steps. First of all, we open the vehicle's engine hood…
Replacing the Lights and Third Brake Light Unit on a Peugeot 207
Replacing the Lights and Third Brake Light Unit on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) These brief and simple steps will show you how to remove and replace the third brake light unit and its bulbs on a Peugeot 207. First, open the rear …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos