Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Brake Light Bulb on a Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Light bulb

Video tutorial

To change the brake light bulb on a Peugeot 207, enter the boot of the vehicle and locate the rear light. Here, you will find a bolt protruding from a hole.

Loosen it; this secures the entire rear light assembly, which you will then remove. Now, without needing to take everything off, detach the electrical plate from the transparent section by simply unclipping the four clips that hold the two parts together.

Identify the faulty bulb, give it a quarter turn, and remove it. Replace it with a working bulb - remember never to touch it with bare hands. Refit it in place.

Now, reattach the clips to secure the electrical plate. Reattach the bolt, and you are finished.


Updated on 17 August 2026 by ScegliAuto


Related tutorials

How to Replace the Brake Light Bulb on a Peugeot 207?
How to Replace the Brake Light Bulb on a Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To replace the brake light bulb on a Peugeot 207, open the boot lid and detach the pins located at the top, near the light. Once the pins are detache…
How to Replace the Brake Light Bulb on a Peugeot 207
How to Replace the Brake Light Bulb on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this article, learn how to replace the brake light bulb on a Peugeot 207. First, open the boot and locate the release pins. Press the pins to unlo…
How to change the rear light bulb in a Peugeot 207
How to change the rear light bulb in a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To change the rear light bulb in a Peugeot 207, open the tailgate and locate the plastic-covered access panel on the inside of the lamp. Remove the c…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos