Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the rear light bulb in a Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Tail light bulb

To change the rear light bulb in a Peugeot 207, open the tailgate and locate the plastic-covered access panel on the inside of the lamp. Remove the cover by pulling it towards you to access the bulb holder assembly. If necessary, unscrew the retaining nuts of the lamp and gently pull the optical unit outwards. At the back, locate the bulb holder to be replaced, turn it counterclockwise and pull it out. Extract the bulb by pressing and twisting it from the socket, insert the new bulb of the same type, then reassemble everything in reverse order.

Posted on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on a Peugeot 207
How to Replace the Rear Light Bulb on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Before you can start, open the tailgate of your Peugeot 207. Begin by moving the side carpet in the boot. Next, unscrew and remove the internal screw…
How to Change the Brake Light Bulb on a Peugeot 207
How to Change the Brake Light Bulb on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To change the brake light bulb on a Peugeot 207, enter the boot of the vehicle and locate the rear light. Here, you will find a bolt protruding from …
How to Replace the Rear Light Bulb on a Peugeot 207
How to Replace the Rear Light Bulb on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this mini guide dedicated to your Peugeot 207, discover how to replace the rear light bulb. Before starting, ensure the car is off, then unlock th…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos