Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Fuel Pump Relay Located on a Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Fuse box

See other generations:
Video tutorial

The fuel pump relay on our Volkswagen Polo is located inside the lower area of the dashboard, beneath the steering column. To access it, start by unclipping and removing the lower cover of the steering column.

To do this, you will need to release the relevant clips and the fastening screws. Once you have removed the cover, you can locate the fuel pump relay and replace it if necessary to restore the proper functioning of the fuel system in our Volkswagen Polo.


Updated on 3 November 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Pump on a VW Polo
How to Replace the Fuel Pump on a VW Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Learn how to replace the damaged fuel pump on a Polo. First, remove the rear seat cushions, then take off the cover cap of the fuel pump. Once the ca…
Where to Find the Fuse Boxes of the Volkswagen Polo Mk5
Where to Find the Fuse Boxes of the Volkswagen Polo Mk5
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) The fuse box in the cabin of the Volkswagen Polo Mk5 is located just below the steering wheel, under a plastic cover. The one for the engine compartm…
How to Remove the Power Steering Pump from a Volkswagen Polo 9N 1.3 Petrol
How to Remove the Power Steering Pump from a Volkswagen Polo 9N 1.3 Petrol
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Today, you will learn how to remove the power steering pump from a Volkswagen Polo 9N 1.2 petrol. First, lift the vehicle and start by removing the w…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - Where is the wiper fuse located in the Volkswagen Polo? Read answer
    • Polo 2017-2025 - Where is the Volkswagen Polo wiper relay located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos