Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to replace the headlight bulb on the Peugeot 207?

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Light bulb
Operation: How to replace the headlight bulb on the Peugeot 207?

In order to replace the Peugeot 207 headlight bulb, the hood must be opened so that the rear part of the headlight can be accessed. Here, you will need to remove the protective circular cover, so that you can disconnect the connector connected to the bulb and extract the latter from its housing. Once the old bulb has been removed, the new one must be connected to the connector and inserted into its housing inside the headlight. At the end, it will be possible to close the headlight with the cover, checking that the bulb works.


Posted on 11 July 2022 by ScegliAuto

    Frequently Asked Questions

    • 207 2006-2015 - How much does it cost to replace the bulb of a rear headlight of a Peugeot 207? Read Answer
    • 207 2006-2015 - How much do the bulbs for the taillights on the Peugeot 207 cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos