Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight on a Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Headlight

To remove the front headlight on a Peugeot 207, unscrew the four upper screws that secure the bumper and the headlight assembly. Also, loosen the two bolts located on the inner side, accessible from the wheel arch. To reach them, move the lining from the wing. Once loosened, the headlight will move: unclip the plastic clip that holds it to the bumper. Disconnect the electrical connector by pressing the red clip. The headlight is now free. To replace the bulb (dipped beam), remove the rear cover: the bulb is held by a metal bracket or a foam block. If the system is broken, you can adapt a bracket from another Peugeot model. Install the new bulb, secure it, and reconnect the connector. Reassemble the headlight in reverse order, ensuring the clips snap into place.

Posted on 20 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp on a Peugeot 207
How to Replace the Front Headlamp on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) How do you remove the front headlamp from a Peugeot 207? To remove the front headlamp, you first need to take off the front bumper. After unscrewing …
How to Remove and Replace the Headlamp of the Peugeot 207
How to Remove and Replace the Headlamp of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) As shown in the video, to replace the left headlamp of your Peugeot 207, open the bonnet and remove the front bumper and bodywork. Once the headlamp …
How to Quickly Polish Cloudy Headlights on the Peugeot 207
How to Quickly Polish Cloudy Headlights on the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video tutorial, you will find instructions to restore the clarity of the front headlights on the Peugeot 207. First, clean the headlight thor…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos