Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wheel with the Spare on a Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Wheel

Video tutorial

Follow these step-by-step instructions to remove and replace the wheel with the spare on a Peugeot 207. First, open the boot and remove the floor shelf to access the spare wheel compartment; then take out the wheel replacement kit along with the spare wheel or space-saver, as shown in the video.

Next, loosen the wheel nuts and lift the vehicle with the jack, removing the wheel and replacing it with the spare; tighten the bolts in a criss-cross pattern and reposition everything in the wheel compartment.


Updated on 24 October 2026 by ScegliAuto


Related tutorials

How to Replace the Wheel on Peugeot 207
How to Replace the Wheel on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) How to replace the damaged wheel using the removal kit on Peugeot 207. Open the boot and take the wheel removal kit, which includes: jack, jack lever…
How to Replace the Rear Wheel Bearing on the Peugeot 207
How to Replace the Rear Wheel Bearing on the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) This guide provides the main instructions on how to remove and replace the rear wheel bearing on the Peugeot 207. First, lift the vehicle and begin b…
Replacing the Driveshaft Boot on a Peugeot 207
Replacing the Driveshaft Boot on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) This guide will show you how to remove and replace the front driveshaft boot on a Peugeot 207 in simple steps. First, lift the vehicle and start by r…

    Frequently Asked Questions

    • 207 2006-2015 - Where is the spare wheel of the Peugeot 207? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos