Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wheel Bearing on the Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Bearing

Video tutorial

This guide provides the main instructions on how to remove and replace the rear wheel bearing on the Peugeot 207. First, lift the vehicle and begin by removing the rear wheel. Then, disconnect the brake caliper by unscrewing the securing screws located at the back, as shown in the video.

Next, remove the centre cap to unscrew the bearing nut, using a puller to remove it and replace it with the new original one. Ensure that the bearing is correctly seated on the hub, then remount the brake caliper onto the disc.


Posted on 31 August 2026 by ScegliAuto


Related tutorials

Replacing the Rear Wheel Bearing on a Peugeot 207
Replacing the Rear Wheel Bearing on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) If you want to replace the rear wheel bearing on your vehicle, you can follow the instructions below and refer to the video tutorial. First, it is ne…
Replacing the Driveshaft Boot on a Peugeot 207
Replacing the Driveshaft Boot on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) This guide will show you how to remove and replace the front driveshaft boot on a Peugeot 207 in simple steps. First, lift the vehicle and start by r…
Replacing the Rear Headlamp Bulbs on Peugeot 207
Replacing the Rear Headlamp Bulbs on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replace the damaged bulbs inside the rear headlamp of your Peugeot 207. Open the boot and remove the side trim panel. Locate the screws securing the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos