Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Wheel Bearing on a Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Bearing

Video tutorial

If you want to replace the rear wheel bearing on your vehicle, you can follow the instructions below and refer to the video tutorial. First, it is necessary to remove the wheel, then unscrew the fixing bolt in the drum brake and obtain the specific extractor for the brake that will be mounted on the drum cover to extract it. At this point, place the drum on the press to extract the bearing.

Then position the new bearing and proceed to remount the drum and finally refit the wheel, tightening the bolts.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Wheel Bearing on the Peugeot 207
How to Replace the Rear Wheel Bearing on the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) This guide provides the main instructions on how to remove and replace the rear wheel bearing on the Peugeot 207. First, lift the vehicle and begin b…
How to Replace the Rear Light Bulb on a Peugeot 207
How to Replace the Rear Light Bulb on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Before you can start, open the tailgate of your Peugeot 207. Begin by moving the side carpet in the boot. Next, unscrew and remove the internal screw…
Replacing the Driveshaft Boot on a Peugeot 207
Replacing the Driveshaft Boot on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) This guide will show you how to remove and replace the front driveshaft boot on a Peugeot 207 in simple steps. First, lift the vehicle and start by r…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos