Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Driveshaft Boot on a Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: CV boot

This guide will show you how to remove and replace the front driveshaft boot on a Peugeot 207 in simple steps. First, lift the vehicle and start by removing the front wheel; then, remove the hub or wheel bearing using a socket spanner. Next, disconnect the wishbone from the braking system by unscrewing the nut from the ball joint; then proceed to extract the driveshaft, thereby removing the boot, as illustrated in the video. Finally, replace it with the new one and reassemble everything!

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Starter Motor on a Peugeot 207
Replacing the Starter Motor on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Need to replace the starter motor on a Peugeot 207? Let's look at how to remove the damaged starter motor. Lift the bonnet, disconnect the battery te…
How to Replace the Gear Knob on a Peugeot 207
How to Replace the Gear Knob on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Before you begin, sit in the driver's seat of your Peugeot 207. Start by unhooking and lifting the lower section of the gear lever gaiter. Then, gras…
How to Replace the Rear Light on a Peugeot 207
How to Replace the Rear Light on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Before you can start, open the tailgate of your Peugeot 207. Begin by moving the side carpet in the boot. Next, unscrew and remove the internal screw…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos