Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the gear knob of the Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Shift knob

The following steps will illustrate the process of disassembling and replacing the gear lever knob of the Peugeot 207. First, we get on board the cabin and start by removing the gear lever gaiter located at the base, levering on the sides; then we remove the clamp found between the gaiter and the knob, then pull the knob upwards with force to detach it from the lever, as shown in the video. At this point, we install the new gear knob on the lever, first reassembling the gaiter and securing the clamp between it and the knob itself, following the video tutorial until the end!

Posted on 22 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob on a Peugeot 207
How to Replace the Gear Knob on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Before you begin, sit in the driver's seat of your Peugeot 207. Start by unhooking and lifting the lower section of the gear lever gaiter. Then, gras…
How to Remove the Gear Knob from a Peugeot 207
How to Remove the Gear Knob from a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) How to remove the gear knob from a Peugeot 207? Here's how to proceed: take the knob in your hands and rotate it left and right until you can remove …
Disassembly of the gear knob of the Peugeot 207.
Peugeot 207 (2006-2015 / MK 1) The instructions in this guide will show us how to disassemble and replace the gear knob of the Peugeot 207, as well as other models from the manufac…

    Frequently Asked Questions

    • 207 2006-2015 - How to replace the gear knob in Peugeot 207? Read answer
    • 207 2006-2015 - How to replace the gear knob in Peugeot 207? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos