Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the gear lever knob of the Peugeot 207.

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Shift knob

In a few simple steps, we will see the process of disassembling and replacing the gear lever knob of the Peugeot 207. First, we get into the car and start by removing the gear lever boot from the base of the lever; then we detach the clamp located between the knob and the boot, using pliers, as shown in the video. At this point, we pull the gear knob out to detach it and remove it from the lever, also removing the boot; we separate the boot and then install the new knob, fixing everything on the lever and inserting the new clamp between the boot and the knob!

Posted on 28 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the gear knob of the Peugeot 207
How to replace the gear knob of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Today we will explain in a few simple steps how to replace the gear knob of the Peugeot 207. By applying pressure outwards, we renew the base of our …
Disassembly of the gear knob of the Peugeot 207.
Peugeot 207 (2006-2015 / MK 1) The instructions in this guide will show us how to disassemble and replace the gear knob of the Peugeot 207, as well as other models from the manufac…
How to remove the gear knob of the Peugeot 207
How to remove the gear knob of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) The following steps will illustrate the process of disassembling and replacing the gear lever knob of the Peugeot 207. First, we get on board the cab…

    Frequently Asked Questions

    • 207 2006-2015 - How to replace the gear knob in Peugeot 207? Read answer
    • 207 2006-2015 - How to replace the gear knob in Peugeot 207? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos