Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to replace the gear knob of the Peugeot 207.

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Gear Shift Knob
Operation: How to replace the gear knob of the Peugeot 207.

To replace the gear knob of the Peugeot 207, we begin by detaching the lower part of the gear lever cover, lifting it up and finding a small strap that we will cut to remove the cover. Once the strap is detached, we lower the cover, pull the gear knob with force (there may be another strap, which we will cut if necessary), and then take the new gear knob and insert it into the cover. We flip the cover, reattach a strap to secure the knob, reposition it on the lever making sure the gear pattern is as centered as possible, and finally attach the cover to the base. The gear knob is now replaced.


Posted on 13 June 2023 by ScegliAuto

    Frequently Asked Questions

    • 207 2006-2015 - How to replace the gear knob in Peugeot 207? Read Answer
    • 207 2006-2015 - How to replace the gear knob in Peugeot 207? Read Answer
    • 207 2006-2015 - How to replace the gear knob in the Peugeot 207? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos