Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to replace the gear knob on a Peugeot 207

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Gear Shift Knob
Operation: How to replace the gear knob on a Peugeot 207

Before we can begin, we will have to go and sit on the driver's seat of our Peugeot 207. Let's start by going to disengage and lift the lower section of the gearshift gaiter. After that, we will have to go and grab the gear knob, and pull it firmly upwards. By doing so, we will have freed the gear knob itself. We then proceed by going to remove the gear lever gaiter, and we will have completed the disassembly. To mount the new gear knob, we will have to follow this procedure in reverse, and we will have correctly completed the replacement.


Posted on 5 February 2024 by ScegliAuto

    Frequently Asked Questions

    • 207 2006-2015 - How to replace the gear knob in Peugeot 207? Read Answer
    • 207 2006-2015 - How to replace the gear knob in Peugeot 207? Read Answer
    • 207 2006-2015 - How to replace the gear knob in the Peugeot 207? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos