Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wheel on Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Wheel

Video tutorial

How to replace the damaged wheel using the removal kit on Peugeot 207. Open the boot and take the wheel removal kit, which includes: jack, jack lever, screwdriver, wheel nut key, telescopic wrench, spare wheel. Position the jack under the jacking point of the car, which is under the stiffest part of the chassis to avoid bending the metal due to excessive weight.

Lift the car slightly and loosen the wheel nuts (if necessary, use a penetrating oil). Raise the car with the jack lever, unscrew the nuts, and pull the wheel off the hub. Fit the new wheel or space-saver wheel. Always remember to store the removal kit with all its parts back in the boot.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

How to Replace the Wheel with the Spare on a Peugeot 207
How to Replace the Wheel with the Spare on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Follow these step-by-step instructions to remove and replace the wheel with the spare on a Peugeot 207. First, open the boot and remove the floor she…
How to Replace the Timing Belt on a Peugeot 207?
How to Replace the Timing Belt on a Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To replace the timing belt on a Peugeot 207, open the bonnet to access the side of the engine block. You will also need to remove the right front whe…
Replacing the Driveshaft Boot on a Peugeot 207
Replacing the Driveshaft Boot on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) This guide will show you how to remove and replace the front driveshaft boot on a Peugeot 207 in simple steps. First, lift the vehicle and start by r…

    Frequently Asked Questions

    • 207 2006-2015 - Where is the spare wheel of the Peugeot 207? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos