Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wheel Bearing on a Peugeot 307

Model: Peugeot 307 - Years 2001-2009
Part: Bearing

To replace the front wheel bearing on a Peugeot 307, lift the vehicle with a jack and secure it with axle stands. Remove the wheel and unscrew the central hub bolt. Dismantle the brake, unscrewing the disc or drum if necessary, and remove the calipers and brake support. Disconnect the driveshaft from the wheel and remove the suspension arm if it obstructs the extraction of the hub. Extract the hub with the worn bearing, using a puller if necessary. Insert the new bearing into the hub and refit it into the suspension assembly. Reassemble the brakes, central bolt, and wheel, then lower the vehicle and check for free rotation without play.

Posted on 30 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Wheel with the Spare on the Peugeot 307
How to Remove and Replace the Wheel with the Spare on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Below are the main steps to remove and replace the wheel with the spare on the Peugeot 307. First, loosen the wheel bolts using the appropriate wrenc…
How to Remove the Spare Wheel from the Peugeot 307 SW
How to Remove the Spare Wheel from the Peugeot 307 SW
Peugeot 307 (2001-2009 / MK 1) In today's tutorial video, discover how to extract the spare wheel from its compartment in the Peugeot 307 SW. First, open the boot's rear hatch and …
How to Replace the Alternator on a Peugeot 307?
How to Replace the Alternator on a Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) Replacing the alternator on a Peugeot 307, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the key is not i…

Other guides you may be interested in

How to set the clock on the Vespa 125 Primavera?

To set the clock on the Vespa 125 Primavera, press and hold the black button located just below the black knob on the bike: keep the button pressed until the hour number starts to flash. Once it is flashing, you can change the hours with single presses of the same button; then, by pressing and holding the button again, the hour number will stop flashing and the minute number will start to flash, which can be modified in the same way, confirming the input by holding the button.

Watch the video!


by ScegliAuto

More videos