Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the boot light bulbs on a Peugeot 307?

Model: Peugeot 307 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Light bulb

Video tutorial

Let’s see how to replace the bulbs in the light fitting located inside the boot of a Peugeot 307: start by opening the rear tailgate and prying with a plastic tool on one side of the transparent light fitting. The bulb inside is of the "push-fit" type and can be pulled out without unscrewing.

Once reached, you can extract it with your fingers (if you have large fingers, use a small screwdriver to push it forward and then grasp it). Take the new bulb and insert it simply by pressing it in. Reattach the light fitting by pressing it until it clicks, and turn on the boot light to check that it works.


Posted on 11 November 2026 by ScegliAuto


Related tutorials

How to change the bulb of a rear headlight of a Peugeot 307
How to change the bulb of a rear headlight of a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) The first step to replace the bulb of a rear headlight of a Peugeot 307 car is to open the trunk of the vehicle and lift the internal side panel on t…
How to Replace the Headlight Bulbs in a Peugeot 307?
How to Replace the Headlight Bulbs in a Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) In this tutorial, you will see how to replace the front headlight bulbs in a Peugeot 307, a very simple and quick operation. First, ensure the key is…
How to Install Headlight Bulbs in a Peugeot 307
How to Install Headlight Bulbs in a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) How to install the bulbs in the headlight of a Peugeot 307? Start by removing the rear headlight and replacing the bulbs. Open and lift the tailgate …

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos