Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Headlight Bulbs in a Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Tail light bulb

How to install the bulbs in the headlight of a Peugeot 307? Start by removing the rear headlight and replacing the bulbs. Open and lift the tailgate of the boot, then remove the fabric covering on the side trim of the boot. Unscrew the plastic securing screws of the rear headlight, disconnect the electrical connectors attached to the headlight, and pull it out of its housing. Install the damaged bulbs with new ones (same voltage). Secure the headlight with the respective securing nuts, then reassemble the covering. Test the operation of the headlight lights.

Updated on 27 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulbs on Peugeot 307
Replacing Headlight Bulbs on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Let's see how to remove the front headlight bulbs on a Peugeot 307. Lift the front bonnet to access the rear of the headlight. Disconnect the cap fro…
Replacing Front Bulb on Peugeot 307
Replacing Front Bulb on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) How to replace the bulbs on a Peugeot 307? Lift the front bonnet of the car, unscrew the securing screws to remove the front headlamp or remove the i…
Replacing Front Headlamp Bulb on Peugeot 307
Replacing Front Headlamp Bulb on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Replace the damaged bulbs in the front headlamp of a Peugeot 307. Open and lift the front headlamp, securing it in place. Access the front headlamp l…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos