Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Speakers on the Peugeot 307?

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Alternator

In this video tutorial, you will see how to remove and replace the front speakers, as well as the rear ones, on the first series Peugeot 307. First, open the front door and start by removing the door panel; to do this, remove the window switch panel by disconnecting the electrical connector found underneath, and unscrew all the screws located on the sides of the panel, as illustrated in the video. Once removed, disconnect the speaker wires; then unscrew the screws to remove the speaker and replace it with the new one!

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the speakers in the Peugeot 307?
How do you replace the speakers in the Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) In order to replace the speakers of the Peugeot 307, you need to completely remove the corresponding door panels, so that you can locate the underlyi…
Replacing the Door Speakers of the Peugeot 307
Replacing the Door Speakers of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this guide, you will find instructions to dismantle and replace the door speakers of the Peugeot 307. First, open the vehicle door and start remov…
Replacement of the front wipers of the Peugeot 307
Replacement of the front wipers of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Today's procedure will show us how to disassemble and replace the front windshield wipers of the Peugeot 307, following the instructions below. First…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos