Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Citroen C5

Model: Citroen C5 RD, X7, MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear headlight bulb of the 2015 Citroën C5, we need to open the trunk of the car and remove the side carpet, in order to access the inside of the headlight. Disconnect the headlight connector and unscrew the screw.

Remove the headlight and proceed with the replacement of the STOP bulb. Open the overhead light and replace the bulb.

Proceed in the same way for the replacement of the right rear headlight bulb. Once the replacement is complete, insert the headlight, connect the connector, and close the side carpet.

If the bulb does not work properly before replacing it again, proceed with checking the fuse related to the headlight.


Posted on 8 October 2025 by ScegliAuto


Related tutorials

Replacement of the rear taillight bulbs of the Citroen C5
Replacement of the rear taillight bulbs of the Citroen C5
Citroen C5 (2008-2017 / RD, X7, MK 2) In this guide we will see the instructions that will allow us to disassemble and replace the position bulbs of the rear headlight of the Citroen C5. …
How to Replace the Number Plate Bulb on a Citroën C5?
How to Replace the Number Plate Bulb on a Citroën C5?
Citroen C5 (1997-2003 / ) To replace the number plate bulb on the Citroën C5, loosen the small screws that secure the light unit in its housing directly above the number plate…
Replacing Indicator Bulbs on Citroen C5
Replacing Indicator Bulbs on Citroen C5
Citroen C5 (2008-2017 / RD, X7, MK 2) With the engine off and the handbrake engaged, lift the bonnet and secure it. Working on the top of the headlamp, inside the bonnet, remove the upper…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos