Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C5
    4. : How to replace the front headlight bulbs of a Citroen C5

Citroen C5 - Video tutorial

Model: Citroen C5 RD, MK 2, X7 - Years 2008-2017
Part: Light bulb
Operation: How to replace the front headlight bulbs of a Citroen C5

Do you want to change the headlight bulbs of a Citroen C5 and don't know how? Let's see together how to proceed in the illustrative video. We open the bonnet by pulling the lever located at the bottom right of the dashboard, let's put it in safety. We remove the plastic rivets with a screwdriver placed on the side trim. We find the inspection caps of the headlights and (placed in the rear part of the headlights) remove them. At this point we will find the bulbs with metal hooks, take out the lamp holders from the lighthouse and go to extract the damaged bulb. We mount the new bulb and (always suitable type and size) we insert the lamp holder in the lighthouse housing. Remove the battery if the left headlight bulbs need to be replaced. Finally we close the lighthouse with the inspection cap. We test the correct functioning of the lights. - Plastic spatula - Split screwdriver.


Posted on 4 October 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos