Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the third brake light on the Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part:

See other generations:
Video tutorial

Today, we will see how to independently replace the third brake light on a 2010 Citroen C4 Picasso. Open the boot and remove the internal cover of the bulb.

Using a 10 mm screwdriver, unscrew the screws securing the lamp. Extract the bulb from its socket and disconnect the connector.

Remove the light unit and replace the bulbs. After replacing them, reattach the light unit, reconnect the connector, and insert the bulb back in. Screw the securing screws back in and remount the internal cover.

Test the bulb's operation by turning on the lights.


Posted on 8 October 2026 by ScegliAuto


Related tutorials

Citroen C4 Picasso (2006-2013 / MK 1) In today's video, we will go through the steps to remove the rear third brake light on a 2010 Citroen C4 Grand Picasso. First, open the boot lid and …
Citroen C4 Picasso (2013-2022 / MK 2) This brief guide will show you how to remove and replace the stop switch on the Citroen C4 Grand Picasso third series, following these simple steps. …
Citroen C4 Picasso (2006-2013 / MK 1) Today, we will see in this video tutorial how to remove and replace the stop switch on the Citroen C4 Picasso, following the instructions below. Firs…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Radio on an Iveco Daily

Resetting the radio on an Iveco Daily is very simple. This operation, which can be completed in seconds, should be performed when the radio experiences any software-related malfunction. First, turn on the vehicle's ignition, and if the radio does not turn on, also turn it on. Then, press the CD-EJECT button for about 10 seconds; you will notice that the radio will begin an automatic reset process. After the necessary time has passed, the radio will be reset. Turn everything off and then turn it back on for further confirmation.

Watch the video!


by ScegliAuto

More videos