Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Stop Switch on the Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013

Today, we will see in this video tutorial how to remove and replace the stop switch on the Citroen C4 Picasso, following the instructions below. First, get in the vehicle and remove the plastic cover found on the driver's side next to the pedals; then remove the brake pedal switch by disconnecting the electric connector, as shown in the video. At this point, replace the switch with the new one, connect it, and check its operation; finally, reassemble everything, following the video until the end!

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Third Brake Light on Citroen C4 Grand Picasso 2010
Removing the Third Brake Light on Citroen C4 Grand Picasso 2010
Citroen C4 Picasso (2006-2013 / MK 1) In today's video, we will go through the steps to remove the rear third brake light on a 2010 Citroen C4 Grand Picasso. First, open the boot lid and …
How to Replace the Stop Switch on the Citroen C4 Grand Picasso MK3
Citroen C4 Picasso (2013-2022 / MK 2) This brief guide will show you how to remove and replace the stop switch on the Citroen C4 Grand Picasso third series, following these simple steps. …
Battery Replacement on Citroen C4 Grand Picasso
Battery Replacement on Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Is the battery of the Citroen C4 Grand Picasso damaged? Here’s how to replace it. Open the car door and release the front bonnet; lift the bonnet. Re…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos