Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Stop Switch on the Citroen C4 Grand Picasso MK3

Model: Citroen C4 Picasso MK 2 - Years 2013-2022

This brief guide will show you how to remove and replace the stop switch on the Citroen C4 Grand Picasso third series, following these simple steps. First, get into the passenger side of the vehicle and start by removing the panel located under the glove compartment by taking out the plastic clips; then unscrew the screws securing the glove compartment to remove it using a Torx screwdriver. At this point, locate the stop switch; disconnect the electrical connector to remove and replace it!

Updated on 23 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Citroen C4 Picasso (2006-2013 / MK 1) Today, we will see in this video tutorial how to remove and replace the stop switch on the Citroen C4 Picasso, following the instructions below. Firs…
Citroen C4 Picasso (2006-2013 / MK 1) To replace the battery of the Citroën C4 Grand Picasso, access the engine bay and move the piece positioned above the battery, which has a red plasti…
Citroen C4 Picasso (2006-2013 / MK 1) The following steps will show us how to disassemble and replace the external rearview mirror of the Citroen C4 Picasso and Grand Picasso. First of al…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos