Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Glove Box on Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Glove compartment

See other generations:
Video tutorial

In this video tutorial, follow the main instructions to remove the glove box on a first-generation Citroen C4 Picasso. First, get inside the vehicle and open the glove compartment door; then remove the internal plastic cover to access the screws.

Next, unscrew the fastening screws using a Torx screwdriver and disconnect the fastening pins found on the opening rods, as shown in the video; then simply pull out the glove box. Apply the reverse procedure for reassembly!


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How to Repair the Glove Compartment of the Citroen C4 Grand Picasso
How to Repair the Glove Compartment of the Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) In this short and simple guide, you will see the main steps to repair the glove compartment of the Citroen C4 Grand Picasso, as well as the C4 Picass…
How to disassemble the central cover of the dashboard of the Citroen C4 Grand Picasso
How to disassemble the central cover of the dashboard of the Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) The instructions provided in this guide will allow us to disassemble and replace the central plastic cover of the dashboard of the Citroen C4 Grand P…
How to Replace the Stop Switch on the Citroen C4 Grand Picasso MK3
Citroen C4 Picasso (2013-2022 / MK 2) This brief guide will show you how to remove and replace the stop switch on the Citroen C4 Grand Picasso third series, following these simple steps. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos