Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Third Brake Light on Citroen C4 Grand Picasso 2010

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Tail light

In today's video, we will go through the steps to remove the rear third brake light on a 2010 Citroen C4 Grand Picasso. First, open the boot lid and remove the entire plastic cover along with the third brake light by prying at the sides; then unclip everything from the tabs and proceed to remove the third brake light by unscrewing the screws with a T20 Torx screwdriver. Now, disconnect the electrical connector and unclip the tabs to access the bulb holder and bulbs; proceed to replace the bulbs or the entire light and reassemble everything!

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to deactivate or activate the start and stop feature on the Citroen Grand C4 Picasso
How to deactivate or activate the start and stop feature on the Citroen Grand C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) To deactivate the start and stop feature on the Citroen Grand C4 Picasso, proceed as follows: insert the key into its slot and start the vehicle. On …
How to activate and deactivate the Start&Stop feature of the Citroen C4 Grand Picasso.
How to activate and deactivate the Start&Stop feature of the Citroen C4 Grand Picasso.
Citroen C4 Picasso (2013-2022 / MK 2) The instructions provided in this guide will show us how to activate and deactivate the Start&Stop system of the Citroen C4 Grand Picasso. First, let…
Why the Start & Stop Might Not Work on Citroen C4 Grand Picasso
Why the Start & Stop Might Not Work on Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) In this video, we see the problem of a Citroen C4 Grand Picasso, which has a common issue with these vehicles: with the Start & Stop activated, when …

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos