Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Fan from a Citroen C4 Grand Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Blower motor

This guide outlines the main steps for removing and replacing the cabin fan in the Citroen C4 Picasso and Grand Picasso. First, get into the vehicle from the driver's side and start by removing the plastic cover located under the steering wheel. You will find the cabin fan resistor and the fan itself. Disconnect the electrical connectors and unscrew the fixing screws to remove the fan, as shown. Replace or repair the cabin fan, applying the reverse procedure for reassembly!

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Dismantling the Airbag Switch Module on a Citroen C4 Grand Picasso
Dismantling the Airbag Switch Module on a Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) This guide shows the procedure to dismantle the airbag switch and module on the second series Citroen C4 Grand Picasso. First, get into the vehicle a…
How to Remove the Windscreen Washer Pump from the Citroen C4 Grand Picasso
How to Remove the Windscreen Washer Pump from the Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) In today's tutorial video, you will see the instructions that will allow you to remove and replace the windscreen washer pump of the Citroen C4 Grand…
How to Replace the Cabin Fan on a Citroën C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) To replace the cabin fan on a Citroën C4 Picasso, first remove the carpet located under the glove compartment on the passenger side, along with the l…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos