Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the steering wheel of the Citroen C4

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Steering wheel

In this video, you will see how to remove the steering wheel of the Citroen C4 Picasso. Remember, the first step is always to disconnect the negative terminal of the battery to avoid airbag issues. In the video, you can see that the airbag unit has already been removed, but removing it is easy: just look behind the steering wheel and identify the two small holes (one on each side) where you can insert two small screwdrivers. This will be enough to release the airbag; you will only need to remove the electrical connectors. Citroen, in addition to the central bolt, also has a lower and an upper plate that need to be unscrewed; then you can remove the central bolt and finally take the steering wheel out of its housing.

Updated on 23 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the control panel of the Citroen C4 Picasso
How to disassemble the control panel of the Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) If you want to disassemble the control panel located on the dashboard of your second series Citroen C4 Picasso completely independently, just follow …
How to remove the radio from the Citroen C4 Picasso
How to remove the radio from the Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Here are the instructions to remove and replace the standard radio of the Citroen C4 Picasso in simple, quick steps. First, get in the vehicle and st…
Replacing the Windscreen on the Citroen C4 Picasso
Replacing the Windscreen on the Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) In this guide, you will find instructions on how to remove and replace the front windscreen of the Citroen C4 Picasso. First, open the bonnet and beg…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos