Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the brake lights on a Citroen C5 Tourer

Model: Citroen C5 MK 3, C5 X - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part:

See other generations:
This video is currently unavailable

Watch the video to learn how to remove the central stop light. To replace the other stop lights, follow the following procedure instead.

Access the trunk and open the rear hatch. Remove the side lining: Remove the side carpet lining to access the rear light.

Unscrew the light screw: Find the screw that holds the light in place on the car body. Unscrew the screw to remove the light from the outside.

Disconnect the electrical connector: once the light is removed, disconnect the electrical connector of the bulbs. Remove the burnt bulb from the socket.

Insert a new stop light bulb into the socket, making sure it is the correct type. Press and rotate the bulb to secure it properly.

Reassemble the light in the same way you removed it. Make sure the gasket is in place and that the light fits correctly.


Posted on 18 December 2024 by ScegliAuto


Related tutorials

Citroen C5 (2000-2008 / DC, MK 1) Learn how to remove the third brake light on a Citroen C5. Remove the plastic-headed pins; take off the spoiler from the tailgate (as shown in the vi…
Citroen C5 (2008-2017 / RD, X7, MK 2) The fuse boxes of the Citroën C5 are responsible for containing the fuses that regulate the operation of the devices installed on the vehicle: in thi…
Citroen C5 (2008-2017 / RD, X7, MK 2) Any fuse in the Citroën C5 is located inside one of the dedicated fuse boxes installed in the vehicle: in this type of vehicle, you will find two box…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos